Blast furnace slags as functional fillers on rheological,thermal, and mechanical behavior of thermoplastics

Blast furnace slags (BFS) is a secondary byproduct of iron industry, which has a combination of acidic and basic oxides and show a complex, multiphase structure. If appropriately tailored, BFS could be an effective functional filler, improving the property profile of thermoplastics such as polypropylene (PP) and polystyrene (PS). As a raw material, the proposed filler may introduce both economic and ecological advantages, as it is considered an inexpensive secondary product rather than a natural resource. The current study aims at investigating the effect of incorporating BFS as a micro‐sized filler on the rheological, thermal, and mechanical behavior of PP and PS. BFS types in this study are air‐cooled, crystalline, and amorphous, grounded types. Both types are ground into 71, 40, and 20 μm batches and introduced in 10, 20, and 30 weight fractions via melt kneading. Mixtures are then formed into 4‐mm and 2‐mm thick plates via compression molding. Slight increase in rheological factors is observed with increasing filler loading. BFS hinders the crystallization of PP, resulting in slight increase of crystallization temperatures (T_c) and lowering of crystallization enthalpy (ΔH_c). No significant effect of filler on transition temperatures (T_g) is reported. Mechanically, BFS increases the tensile modulus of PP, but decreases its strength. For PS formulations, a modest toughening effect is observed by slag filler. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43021.     

Geothermal use of an Alpine aquifer—Davos pilot study

Grundwasser - Topographically induced Alpine regional groundwater flow systems below the unconsolidated valley fillings constitute a substantial unused geothermal resource. Within the...     

Understanding the binder chemistry,microstructure, and physical properties of volcanic ash phosphate geopolymer binder

This work aims to assess the influence of the chemical composition of the binder resulting from the reaction of phosphoric acid and volcanic ash on its final characteristics. Six initial compositions of volcanic ash phosphate geopolymer with molar ratios Fe/P of 0.27, 0.5, 0.54, 0.81, 1, and 1.5 were designed by adding various dosages of phosphoric acid to volcanic ash. The results show that the hardening time increases with the decrease of molar ratios Fe/P. An excess of phosphoric acid leads to an unstable binder that is partially destroyed with the aging of the binder. The volcanic ash phosphate geopolymer with molar ratios of Fe/P = 0.5–0.54 has the optimum compressive strength (49–53 MPa at 90 days), the lowest water absorption (8.8-9.5 wt.%) as well as porosity (18–19.6 vol.%). The main binder is a porous phase of ferro-silico-aluminophosphate. Secondary phases were also identified in some mixes including ferro-aluminophosphate and magnesium phosphate.     

Aerosol Process for the In Situ Coating of Nanoparticles with a Polymer Shell

This article presents a novel method to encapsulate gas-borne nanoparticles with a polymeric shell. This method implies heterogeneous condensation of monomer vapor around the surface of nanoparticles as nuclei and polymerization is then subsequently started by addition of NH₃ as aerosol initiator. Ag and SiO₂ nanoparticles were generated as inorganic core by spark discharge and nebulization, respectively, and glycidyl methacrylate (GMA) was used as organic monomer. The effect of several parameters, including vapor pressure of monomer and properties of inorganic core such as morphology, material, particle size, and production method on the thickness of polymeric shell and morphology of resulting nanocomposites has been investigated. The particle size distribution and morphology of the resulting core-shell nanoparticles have been studied via scanning mobility particle sizer (SMPS) and transmission electron microscope (TEM). Finally, the coating efficiency was determined by aerosol photoemission (APE) and the results show that monomer and polymer coating efficiency are 99% and 60%, respectively.

Copyright 2014 American Association for Aerosol Research     

A monolithically integrated high‐efficiency Cu(In,Ga)Se2 mini‐module structured solely by laser

Monolithically integrated Cu(In,Ga)Se₂ mini‐modules were fabricated in order to reduce the width of patterning related dead area. The Cu(In,Ga)Se₂ layers were prepared on soda‐lime glasses using the multistage process at low substrate temperature below 500 °C. A picosecond laser with a wavelength of 532 nm was used for all of the structuring processes (P1, P2, and P3) for the monolithic integration. A “lift‐off” type structuring was applied for P1 and P3, and an “ablation” type was for P2. The laser structuring was optimized to be minimizing the dead area width, and the width of about 70 µm was successfully achieved. A mini‐module, in which the optimized structuring processes were applied for the integration, demonstrated a certified efficiency of 16.6%. Copyright © 2015 John Wiley & Sons, Ltd.     

Gas–Solid Interactions During Nonisothermal Heat Treatment of a High-Strength CrMnCN Austenitic Steel Powder: Influence of Atmospheric Conditions and Heating Rate on the Densification Behavior

This work deals with gas?Csolid interactions between a high-alloyed steel powder and the surrounding atmosphere during continuous heating. It is motivated by the recently developed corrosion-resistant CrMnCN austenitic cast steels. Here, powder metallurgical processing would be desirable to manufacture highly homogeneous parts and/or novel corrosion-resistant metal-matrix composites. However, the successful use of this new production route calls for a comprehensive investigation of interactions between the sintering atmosphere and the metallic powder to prevent undesirable changes to the chemical composition, e.g., degassing of nitrogen or evaporation of manganese. In this study, dilatometric measurements combined with residual gas analysis, high-temperature X-ray diffraction (XRD) measurements, and thermodynamic equilibrium calculations provided detailed information about the influence of different atmospheric conditions on the microstructure, constitution, and densification behavior of a gas-atomized CrMnCN steel powder during continuous heating. Intensive desorption of nitrogen led to the conclusion that a vacuum atmosphere is not suitable for powder metallurgical (PM) processing. Exposure to an N₂-containing atmosphere resulted in the formation of nitrides and lattice expansion. Experimental findings have shown that the N content can be controlled by the nitrogen partial pressure. Furthermore, the reduction of surface oxides because of a carbothermal reaction at elevated temperatures and the resulting enhancement of the powder??s densification behavior are discussed in this work.     

Waste disposal and waste avoidance

Waste disposal and waste avoidance are examined from two different perspectives, from the point of view of the waste 'producing' company on the one hand, and from the point of view of the waste disposing company on the other hand. The idea of the basic model lies in the 'turning upside down' of the lot-sizing approach to inventory control theory. We derive a corresponding formula for disposal that shows that the number of waste disposals depends positively on the waste accumulation rate and negatively on the fixed costs for a pick-up. Moreover, we formally work out at which waste avoidance costs a company will enlist the services of a disposal company. Specifically, disposal tends to be preferred to avoidance when waste-avoidance is relatively expensive and three cost rates to be specified are relatively low. Finally, we take the perspective of a monopolistic disposal company that has to decide on the optimal pricing policy. In our model, we determine that the price for a pick-up should be chosen just to cover costs. The disposal company can earn a profit by the suitable choice of the price per unit waste to be disposed of.     

Nucleate Boiling on a Single Site: Contact Angle Analysis for a Quasi-2D Growing Vapour Bubble

Heat transfer prediction under boiling condition is still unresolved. In this paper, a basic study on bubble growth is carried out. Recent works show that contact line region plays an important role for heat and mass transfer in nucleate boiling regime. Three dimension experimental set-up lead to a mirage effect which disturbs measurements. To overcome this problem, a new quasi two dimensional experimental set-up is designed. This Hele–Shaw like configuration allows measuring the contact angle and contact line displacement during the bubble growth. A noticeable behavior of the contact angle is observed, and the influence of the sub-cooling level on the bubble growth rate and the contact angle value is studied.     

Actor networks and the construction of applicable knowledge: the case of the Timbre Brownfield Prioritization Tool

This article deals with experiences acquired during the process of developing the Timbre Brownfield Prioritization Tool (TBPT). Developing a decision support tool that takes into account the expectations and experiences of its potential users is similar to creating applicable knowledge by the joint action of scientists and heterogeneous actors. Actor network theory is used to explore the construction of this form of applicable knowledge as a process of actor network creation. Following the French sociologist Callon, networks are seen to be initiated and carried out by a group of scientists (tool developers) via four moments of translation, called problematization, interessement, enrolment and mobilization. Each step in the construction of the TBPT—from the initial research question to the final model—can be linked in retrospect to changing configurations of actor networks. Based on the experiences of the tool developers in the Czech Republic, Poland, Germany and Romania, we illustrate how these configurations varied across space and time. This contribution emphasizes the ability to correlate gains in knowledge with the more visible changes in the scope of actor networks in order to highlight achievements but also limitations in acquiring applicable knowledge.     

A note on the long-run elasticities from the energy consumption–GDP relationship

The goal of this paper is to examine the long-run elasticities of the impacts of energy consumption on GDP and GDP on energy consumption. The energy consumption–GDP relationship is amongst the most popular relationships examined in the energy economics literature. The bulk of the extant literature has assumed a positive relationship between energy consumption and real GDP. Our analysis shows that in only around 60% of the countries considered the relationship is positive.